CHISAGE ESS CE48200-W LiFePO4 Battery 51.2 V 200 Ah

Technical specifications

Important: this product is one CHISAGE ESS CE48200-W 51.2 V 200 Ah battery with 10.24 kWh nominal energy. It is not a ready multi-module battery assembly and not a cabinet with several batteries.

Important: CE48200-W is a lithium iron phosphate battery for inverter systems. Charge, discharge, lower and upper voltage, communication protocol and current limit settings must be matched with the battery passport data, BMS and inverter used in the system.

Important: IP65 protection does not cancel proper installation requirements. Installation location, cable entry sealing, ventilation, temperature, absence of condensation, protection against mechanical damage and manufacturer requirements must be considered.

Important: when connecting several identical batteries in parallel, manufacturer requirements, same model, state of charge, correct cable scheme, address settings and BMS communication must be followed. Selection and installation must be performed by a qualified specialist.

Description and purpose

CHISAGE ESS CE48200-W is one wall-mounted or floor-standing LiFePO4 battery with 51.2 V nominal voltage, 200 Ah capacity and 10.24 kWh energy. It is designed for hybrid and off-grid inverters, solar power systems, backup power systems and home energy storage systems.

CE48200-W is suitable for applications where longer autonomous power is needed compared with 5.12 kWh batteries: homes, offices, shops, boiler equipment, pumps, refrigerators, routers, video surveillance, lighting, communication, server and network equipment. With solar panels, the battery can store daytime generation and supply it in the evening, at night or during grid outages.

LiFePO4 technology

LiFePO4 / LFP chemistry is well suited for backup power and solar power systems because of stable voltage, long cycle life and safe operation when installed correctly. This battery is designed for regular charge and discharge cycles, so it is suitable not only for rare emergency use, but also for daily operation in an energy system.

The 10.24 kWh nominal energy applies to one CE48200-W battery. One such module can be used as a separate inverter battery, and if needed, the system can be scaled by connecting several identical batteries in parallel according to manufacturer requirements.

BMS, communication and inverter compatibility

CE48200-W supports CAN and RS485 communication interfaces, which is important for operation with modern inverters. Through battery communication, the inverter can better consider state of charge, voltage, currents and battery operating limits.

Before purchase, it is important to check compatibility with the exact inverter: 51.2 V voltage, 40-58.4 V operating range, allowed charge and discharge currents, communication protocol, BMS settings and connection requirements. A battery must not be selected only by capacity - safe operation depends on the full combination of battery + inverter + cables + protection + load.

Wall-mounted and floor-standing installation

CE48200-W is a white wall-mounted/floor-standing battery with increased capacity. It is not a rack-mounted module, but a separate enclosure for wall or floor installation in a suitable indoor location. This format is convenient for a house, office, technical room, energy cabinet or an area near the inverter.

During installation, the 86 kg weight, reliable mounting, access to power terminals, service space, correct cable cross-section, protection devices, ventilation and absence of conditions that may cause overheating, condensation or housing damage must be considered.

Where CE48200-W is used

• backup power for homes, apartments, offices, shops or warehouses
• solar power systems with hybrid inverters
• off-grid and partially autonomous energy systems
• 48 V / 51.2 V energy storage systems
• power for boilers, pumps, lighting, routers, communication and video surveillance
• backup for server, network, security and retail equipment
• scaling option - up to 15 identical batteries in parallel when connected correctly

Why buy CHISAGE ESS CE48200-W at Levite

At Levite, you can choose CHISAGE ESS CE48200-W for a specific inverter, solar panels, load and desired backup runtime. For battery systems, it is important not only to buy by capacity, but to match the battery with the inverter, BMS, currents, cables, protection devices and operating modes.

One CHISAGE ESS CE48200-W battery at Levite includes a 2-year warranty. This is important for backup power and solar power systems, where the battery is one of the key parts of safety, autonomy and stable power supply.