| Battery type | LiFePO4 / LFP | Model | MOON10-W |
| Nominal voltage | 51.2 V | Nominal capacity | 200 Ah |
| Nominal energy of one battery | 10.24 kWh | Operating voltage | 44.8-57.6 V / 40-58.4 V in some materials |
| Recommended charge current | 100 A | Max continuous charge current | 100 A |
| Recommended discharge current | 100 A | Max continuous discharge current | 150 A |
| Max output current | 0.75C / 150 A | Parallel connection | up to 15 identical batteries |
| Charge temperature | 0 to +55 degrees | Discharge temperature | -20 to +55 degrees |
| Cycle life | >6000 cycles | Cycle condition | 25 degrees, 0.5C/0.5C |
| Protection degree | IP21 | Communication ports | CAN, RS485 |
| BMS | integrated | Indication | SOC indicator / display |
| Product set | 1 battery | Installation | wall-mounted, floor-standing |
| Depth | 187 mm | Width | 600 mm |
| Height | 822 mm | Weight | 92.5 kg |
| Certification | IEC62619, UN38.3, CE-EMC, ROHS | Levite warranty | 2 years |
Important: this product is one CHISAGE ESS MOON10-W 51.2 V 200 Ah battery with 10.24 kWh nominal energy. It is not a ready multi-module battery assembly and not a cabinet with several batteries.
Important: MOON10-W is a lithium iron phosphate battery for inverter systems. Charge, discharge, lower and upper voltage, communication protocol and current limit settings must be matched with the battery passport data, BMS and inverter used in the system. The supplier card lists 44.8-57.6 V, while some MOON10-W technical materials list 40-58.4 V, so the exact revision must be checked before installation.
Important: IP21 protection means the battery is designed for a protected indoor location, technical area or careful installation near the inverter. It is not an outdoor battery for open-air mounting. Moisture, condensation, overheating, mechanical damage and incorrect power cable connection must be avoided.
Important: when connecting several identical batteries in parallel, manufacturer requirements, same model, state of charge, correct cable scheme, address settings and BMS communication must be followed. Selection and installation must be performed by a qualified specialist.
CHISAGE ESS MOON10-W is one wall-mounted or floor-standing LiFePO4 battery with 51.2 V nominal voltage, 200 Ah capacity and 10.24 kWh energy. It is designed for hybrid and off-grid inverters, solar power systems, backup power systems and home energy storage systems.
MOON10-W is suitable for applications where longer autonomous power is needed: homes, offices, shops, boiler equipment, pumps, refrigerators, routers, video surveillance, lighting, communication, server and network equipment. With solar panels, the battery can store daytime generation and supply it in the evening, at night or during grid outages.
LiFePO4 / LFP chemistry is well suited for backup power and solar power systems because of stable voltage, long cycle life and safe operation when installed correctly. This battery is designed for regular charge and discharge cycles, so it is suitable not only for rare emergency use, but also for daily operation in an energy system.
The 10.24 kWh nominal energy applies to one MOON10-W battery. One such module can be used as a separate inverter battery, and if needed, the system can be scaled by connecting several identical batteries in parallel according to manufacturer requirements.
MOON10-W supports CAN and RS485 communication interfaces, which is important for operation with modern inverters. Through battery communication, the inverter can better consider state of charge, voltage, currents and battery operating limits.
Before purchase, it is important to check compatibility with the exact inverter: 51.2 V voltage, operating voltage range, allowed charge and discharge currents, maximum continuous discharge 150 A, communication protocol, BMS settings and connection requirements. A battery must not be selected only by capacity - safe operation depends on the full combination of battery + inverter + cables + protection + load.
MOON10-W is a white wall-mounted/floor-standing MOON series battery. It is not a rack-mounted module, but a separate enclosure for wall or floor installation in a suitable indoor location. This format is convenient for a house, office, technical room, energy cabinet or an area near the inverter.
During installation, the 92.5 kg weight, reliable mounting, access to power terminals, service space, correct cable cross-section, protection devices, ventilation and absence of conditions that may cause overheating, condensation or housing damage must be considered.
At Levite, you can choose CHISAGE ESS MOON10-W for a specific inverter, solar panels, load and desired backup runtime. For battery systems, it is important not only to buy by capacity, but to match the battery with the inverter, BMS, currents, cables, protection devices and operating modes.
One CHISAGE ESS MOON10-W battery at Levite includes a 2-year warranty. This is important for backup power and solar power systems, where the battery is one of the key parts of safety, autonomy and stable power supply.