Jup-10G2-LE Hybrid Inverter 10 kW 48 V

Description

Jup-10G2-LE Single-Phase Hybrid Inverter 10 kW 48 V

Technical specifications

Battery voltage	48 V	Length	514 mm
Width	292 mm	Height	665 mm
Weight	34-35 kg	Max charge current	210 A
Battery voltage range	40-60 V	Max discharge current	210 A
Battery type	lead-acid or lithium-ion	Li-ion strategy	self-adaption to BMS
Charging curve	3 stages / equalization	External temperature sensor	optional
Max PV input power	15 000 W	PV input voltage	370 V, 125-500 V
PV start voltage	120 V	MPPT range	150-425 V
PV input current	26+26 A	Max PV Isc	34+34 A
MPPT / strings	2 MPPT, 2+2 strings	Rated AC power	10 000 W
Max AC power	12 000 W	Rated AC current	45.5/43.5 A
Max AC current	50.0/47.8 A	AC passthrough current	60 A
Peak off-grid power	1.8 times, 10 seconds	AC output	50/60 Hz, 220/230 V
Grid type	single-phase	Power factor	0.8 leading - 0.8 lagging
Current harmonics	THD <3%	Max efficiency	up to 97.90%
Euro efficiency	up to 97.00%	MPPT efficiency	up to 99.90%
Protection rating	IP65	Operating temperature	-45 to +60 degrees, possible derating above 45 degrees
Cooling	Smart Cooling	Noise	up to 45 dB
BMS communication	CAN, RS485	Display	5-inch color touch LCD
Installation	wall-mounted	Surge protection	DC Type II / AC Type III
ARC fault detection	optional	Manufacturer	CHISAGE ESS
Levite warranty	2 years

Important: derating is possible above 45 degrees. This must be considered during installation, location selection, ventilation planning, load selection and solar power system calculation.

Important: peak off-grid power is a short-term mode and must not be treated as continuous operating load. Solar panels, batteries, protection devices and cables must be selected according to the passport data of the exact equipment revision.

Description and purpose

Jup-10G2-LE is a single-phase CHISAGE ESS JUP series hybrid inverter for solar power systems, 48 V battery storage, backup power and off-grid sites. The model is rated at 10 kW and is suitable for private homes, offices, shops, small businesses, server equipment, pumps and sites that require powerful single-phase power.

The inverter combines solar panels, batteries, the utility grid and a backup diesel generator into one energy system. This solution helps use solar energy, store it in batteries, support power during outages and reduce dependence on the external grid.

On-grid and Off-grid operation

Jup-10G2-LE supports both grid-connected and off-grid operation. In On-grid mode, the inverter works together with the utility grid, solar panels and batteries, helping power loads, charge the battery and use solar generation more efficiently.

In Off-grid mode, the inverter can support site power without the utility grid by using energy from solar panels, batteries or a diesel generator. EPS output is provided for backup power and On-grid / Off-grid mode switching.

For autonomous operation, up to 20 inverters can be connected in parallel, and different power inverters can also be paralleled. This allows the system to be scaled for larger single-phase loads.

JUP series features

Single-phase hybrid inverter with 10 kW rated power
Operation with 48 V battery systems
Support for On-grid and Off-grid modes
EPS output for backup power
Battery charging and discharging according to time settings
Independent AC input for diesel generator
Support for storing energy from diesel generator
Parallel operation of up to 20 inverters in off-grid mode
Colorful 5-inch touch LCD display
IP65 enclosure protection

Solar input and MPPT

The solar input section is designed for up to 15 000 W PV input power. Two MPPT trackers and a 2+2 string layout allow flexible solar panel connection. MPPT range 150-425 V, start-up voltage 120 V and PV input voltage 370 V with 125-500 V range must be considered when designing solar strings.

Safety and protection

The inverter includes protections important for safe operation of a solar energy system: PV input lightning protection, anti-islanding protection, PV string reverse polarity protection, insulation resistance detection, residual current monitoring, output over current protection, output short protection and output over voltage protection.

At Levite, you can choose Jup-10G2-LE for solar panels, 48 V batteries, a single-phase grid, generator backup and real site requirements. The CHISAGE ESS inverter category includes a 2-year store warranty from Levite.